Suspension Lowering Module 2006-2020 | plug-and-play system

for Mercedes Airmatic suspension

about the function

Send VIN number to be sure that the device will work on your Mercedes.

The lowering setting will be loaded via the ODB2 diagnostic port in the footwell of the car. After plugging the module into the OBD2, the menu will appear on the Mercedes Comand screen. After changing and saving the settings, the suspension will adjust to the new height in 30 seconds. The factory setting will always be stored on the module and the user can set the suspension back to the factory setting. Once the settings are loaded, simply unplug and store for future use.

Key benefits are:
no need to go to the dealer, no wires, no soldering, no car disassembling
no need to connect the device to a laptop, smartphone, PC
all the settings are performed via Control Wheel (or numbers) and Comand display
restoring factory level in 30 seconds
our module stores current user settings so you do not need to keep it connected

Compatible with following Mercedes with Airmatic suspension:
S-class w221, w222, c217
CLS-class w218, c257
E-class w212, w213, c238
C-class w205
GL/GLS-class x166
ML/GLE-class w166, c292
GLC-class x253

The module has the following settings:
Factory: sets the suspension level to factory settings
Low: factory minus 32mm front and rear
Custom: user selects the height, 1 step is 1mm, min 70mm lower, max 40mm higher, front and rear separately.
For example, you can select minus 29mm front and minus 27mm rear.

The price includes activation for one car.

Video description

payment

Suspension Lowering Module 2006-2020 | plug-and-play system

Item Weight: 3.52 ounces
Country of Origin: Poland
Manufacturer Part Number: 1
UPC: 688946797392

FROM:

550.00 $

reviews

frequent questions and answers:

The module is easy to use. You need to insert the module into the OBD2 diagnostic port and select the desired height. Additionally, you don’t need to install or configure anything.

You can lower the suspension up to 40mm and it’s safe for the ride and the suspension. If lower, it’s only for photos or short rides. We also recommend doing wheel alignment after lowering, if you ride below 35mm the tires will wear out faster without alignment.

In custom mode you can select any height in front and rear separately. 1 step is 1mm, min 70mm lower, max 40mm higher from factory. For example, you can select minus 29mm front and minus 27mm rear.

The suspension will work as usual, but additionally lowered by the module. For example, as before, the suspension will become lower if you switch from Comfort to Sport+ mode (-15mm). If you lower the car by -30mm with the module, total lowering will be -45mm from factory Comfort mode. The same way "raise" button works.

There is no need to keep the module plugged in all the time. You need to plug it in when you want to change the height or return to the factory height. Afterwards, disconnect the module.

still having questions?

INSTRUCTION:

to read

1) start engine, close doors and turn on the radio
2) plug in the module to OBD2 diagnostic port and menu 1/2 appears on the screen
There are 3 basic modes: – “factory” – the car will rise to the factory height – “low” – factory minus 32mm in front and rear – “custom” – factory minus the value that you select in the menu 2/2 (min -70mm, max +40mm, 1 step = 1 mm, front and rear separately)
3) spin a control knob under trackpad left / right to switch between modes in menu 1/2 To install “low” mode change “sel” to “low” and press the knob for confirmation Important: don’t plug out the module from the OBD2 port until you receive “OK” message on the screen 3a) if you want to make your own height: – tilt the knob up/down to switch to menu 2/2 “Edit custom mode” and press it – spin the knob to choose the height and press it for confirmation – in menu 1/2 change “sel” to “custom” and confirm choice
4) plug out the module

We recommend making a wheel alignment after lowering to avoid increased tire wear, especially if you are going to drive below -40mm.