Instagram Facebook Whatsapp Youtube

x167 MultiBeam LED Module for GLS400 2020-2021

MWM hand-held module for Mercedes x167 GLS400
схема
схема

about the function

схема (1)

The MWM module allows you to activate all (7) functions of the MultiBeam headlights.

Adaptive Highbeam Assist Plus switches automatically between:
– Dipped beam
– Partial main beam (not available as US/CA cars)
– Main beam
The partial main beam uses the main beam to shine past other road users rather than dazzling them. The vehicle in front is illuminated by the dipped beam. The advantage is that parts of the roads with no cars illuminated much longer distance as Main beam is still ON there

Active light function
The headlamps follow the steering movements. Relevant areas are better illuminated while driving. the active light function evaluates the course of the lane in which you are driving and adjusts the light in advance. The function is active when the dipped beam is switched on.

Cornering light function
Cornering light improves the illumination of the road over a wide angle in the direction you are turning, enabling better visibility in tight bends, for example. It can only be activated when the dipped beam is switched on.
The function is active:
– At speeds below 25 mph (40 km/h) when the turn signal light is switched on or the steering wheel is turned.
– At speeds between 25 mph (40 km/h) and 45 mph (70 km/h) when the steering wheel is turned.
Roundabout and intersection function: the cornering light is activated on both sides through an evaluation of the current GPS position of the vehicle. It remains active until after the vehicle has left the roundabout or the intersection.

Motorway mode
The motorway mode increases the range and brightness of the cone of light enabling better visibility.

Enhanced fog light function
The enhanced fog light function reduces the glare experienced by the driver and improve the illumination of the edge of the carriageway.

Adverse weather light
The adverse weather light reduces reflections in rainy conditions by dimming individual LEDs in the headlamps. This reduces the glare for the driver and other road users.

City lighting
City lighting improves the illumination of roadsides within built-up areas using a broader distribution of light.

Not all functions of the MultiBeam headlights you can get due to the technical features of some of the Mercedes models, whose versions of Multibeam headlights are older and do not technically support them.

The price includes activation for one car.
Contact us in any convenient way from the Contact Us section, send the VIN number of your Mercedes to make sure that the module is compatible.

Video description

схема (1)

payment

схема (1)
Loading file
  • Fullscreen
  • Wireframe
  • Zoom In
  • Zoom Out
  • Rotation
  • Screenshot
  • Help

Controls

×
  • Rotate with the left mouse button.
  • Zoom with the scroll button.
  • Adjust camera position with the right mouse button.
  • Double-click to enter the fullscreen mode.
  • On mobile devices swipe to rotate.
  • On mobile devices pinch two fingers together or apart to adjust zoom.
  • On mobile devices 3 finger horizontal swipe performs panning.

x167 MultiBeam LED Module for GLS400 2020-2021

The MultiBeam LED Module is configured for the Mercedes-Benz GLS400 with the x167 chassis, produced from 2020 to 2021. It activates supported MULTIBEAM LED lighting functions already available in the vehicle’s headlight system. The hand-held module is prepared for the specified vehicle and can be used through the diagnostic port without a laptop or special tools. Please submit your VIN before ordering so compatibility with your exact vehicle specification can be confirmed.

Be the first to review

FROM:

550.00 $

Send an Order Request
Buy Now

Order Processing

схема (1)
Orders are processed within 1–3 business days after payment confirmation. Tracking details are sent by email or SMS after dispatch. We ship worldwide via FedEx, DHL Express, DPD, and InPost for selected destinations. Delivery to PO Boxes is not available.

Estimated Delivery Times

Destination Estimated Delivery Time
European Union 1–7 days
United Kingdom 2–8 days
North America 3–10 days
Australia 3–12 days
Switzerland, Norway, Sweden, and Finland 1–11 days, depending on the selected courier
Asia, South Korea, and the United Arab Emirates 3–21 days
Other International Destinations 3–21 days
International orders may be subject to customs duties, import taxes, or local carrier fees. These charges are the responsibility of the recipient.

Returns

Only defective products may be returned within 14 days from the delivery date. Approved returns are free of charge and qualify for a full refund after the returned product has been received and inspected. Non-defective products cannot be returned. For shipping or return assistance, contact info@mwmods.com.

frequent questions and answers:

No, you only need the module to activate the new headlight functions.
Use the module the same way again to disable the changes. You need to do this before you visit the dealer so he won't know about the changes.
Yes, specify the manager how many activations are needed. Be sure to send the VIN number for verification.

still having questions?

ASK US A QUESTION
схема (2)

INSTRUCTION:

схема (1)

This is a two step process, you will be plugging and unplugging the tuneOBD module twice.  Please read all directions before beginning.
Prepare the Car: The car must be put into programming mode first.  Make sure the car is warm and everything is stable.  Turn off accessories and unplug any SD or USB devices.  Don’t change any settings or press any buttons while programming.
The car must be in IGNITION position 2 (all cluster leds are ON but the motor is OFF)
Go to Youtube and watch this video first – this is the video showing “IGNITION POSITION 2”.

You are ready.
Now, plug the module to the OBD2 diagnostic socket under the dash.
When the program is finished, you will see no longer flashing green light, then remove the module from OBD port
Never remove the Module unless the the green light stop flashing.

Before testing the new features, you need to configure the vehicle
– select AUTO at the light rotary switch
– push the high beam lever forward and see white high beam with (A) sign at the cluster+blue high beam sign

Follow few steps to put new files. The first open the module. Check Youtube video on how to open the module in the most gentle way possible. The archive files (3) must be copied to the SD card inside the module. Use your notebook on Windows and SD card-reader. Format the SD card to FAT32 before recording files.

filename !FIRMWARE.LDR start with ! and this is not the mistake

If you are using an Apple Mac, follow simple steps according the video. Windows users do not need to follow this video.

Carefully plug SDcard back to the module and close it with cover.

reviews

схема (1)

Description

The MultiBeam LED Module is configured for the Mercedes-Benz GLS400 with the x167 chassis, produced from 2020 to 2021. It activates supported MULTIBEAM LED lighting functions already available in the vehicle’s headlight system. The hand-held module is prepared for the specified vehicle and can be used through the diagnostic port without a laptop or special tools. Please submit your VIN before ordering so compatibility with your exact vehicle specification can be confirmed.

Additional information

production-year

2020, 2021
auto-model

GLS400
chassis-number

x167

Reviews

There are no reviews yet.

Be the first to review “x167 MultiBeam LED Module for GLS400 2020-2021”

Your email address will not be published. Required fields are marked *

Check these modules for GLS400

CONTACTS:

схема (1)

Instagram

Facebook

Youtube

TikTok

WhatsApp

Email

TEXT US
buy now

Apply for order

Pay with debit or credit card via PayPal
Fill the form below, click “Pay Now,” and proceed payment. Thats all!

TOTAL COST:

550.00 $

Leave a question