1) start engine, close doors and turn on the radio
2) plug in the module to OBD2 diagnostic port and menu 1/2 appears on the screen
There are 3 basic modes:
– “factory” – the car will rise to the factory height
– “low” – factory minus 32mm in front and rear
– “custom” – factory minus the value that you select in the menu 2/2 (min -70mm, max +40mm, 1 step = 1 mm, front and rear separately)
3) swipe on trackpad left or right to switch between modes in menu 1/2
to install “low” mode change “sel” to “low” and click “back” button for confirmation
Important: don’t plug out the module from the OBD2 port until you receive “OK” message on the screen
3a) if you want to make your own height:
– swipe on trackpad up or down to switch to menu 2/2 “Edit custom mode” and click “back”
– swipe left/right, up/down to choose the height and click “back” for confirmation
– in menu 1/2 change “sel” to “custom” and confirm choice
4) plug out the module
Important: don’t leave the module connected
We recommend making a wheel alignment after lowering to avoid increased tire wear, especially if you are going to drive below -40mm.
Eric R. Bennett –
Best money spent. Super easy install and works perfectly.
Kevin Anderson –
Everything went smoothly. The order was handled quickly and communication was excellent.
Kenneth Morgan –
The service exceeded my expectations. They were easy to contact and took the time to explain things properly.
Jason –
I got their stage 1 and lowering module, very pleased with the results and it’s reasonably priced.
Sarah M. –
I have the Most Wanted Mods OBD lowering module. It works perfectly and a massive advantage is being able to plug it in at any time and change your ride height in seconds depending upon your mood or conditions. When you plug the module into your OBD port, the lowering settings pop up on your second screen.
Jonathan –
I’ve discovered another cool use of being able to lower at 1mm increments: measuring for spacers or wheel offsets. Having this lowering ability to -70mm, I can lower in increments until the widest part of the wheel/tire is lined up with the narrowest part of the fender and accurately measure the gap.
Christopher Hall –
Great product I have purchased other products offered by seller.