1) turn ignition ON (all leds on Instrument Cluster are ON)
TWO times press start button without a brake pedal for cars with keyless go
2) wait for the head unit to get fully loaded (about 20 seconds after you turn ignition ON)
3.1) to get LOW mode:
– plug the module into the OBD-2 port
– observe head unit display for color messages (blue means LOW, green means FACTORY)
3.2) to get EXTRA-LOW mode:
– fully press and hold gas pedal and at the same time not releasing the pedal plug the module into the OBD-2 port
– release the pedal 2 seconds after you plugged the module in
– observe head unit display for color messages (red means EXTRA-LOW, green means FACTORY)
4) plug the module out
5) start engine to let Airmatic system apply changes
6) get off the car and CLOSE all doors. Airmatic ECU will not change height while doors are opened
To return to factory height repeat the above steps and observe screen for green color
We recommend making a wheel alignment after lowering to avoid increased tire wear, especially if you are going to drive below -40mm.
Reviews
There are no reviews yet.