CarPlay | AndroidAuto Module

MWM hand-held module for Mercedes r231 SL63 AMG

about the function

CarPlay and Android Auto are systems that allow you to use smartphone functions such as maps, music, Youtube and contacts without taking your eyes off the road. On many Mercedes cars this function is disabled by software, because it was not included in the package, although technically your car supports it. The MWM module allows you to activate both CarPlay and Android Auto.

The price includes activation for one car.

Contact us in any convenient way from the Contact Us section, tell us the VIN number of your Mercedes to make sure that the module are compatible.

Video description

payment

CarPlay | AndroidAuto Module

260.00 $

The other Mods for your Mercedes below can be recorded on single module.
The module is available free of charge for orders of 5 Mods or more.

TOTAL COST:

1200$

reviews

frequent questions and answers:

Does the module have to be plugged into the OBD all the time?

No, plug in the module to activate or deactivate CarPlay and Android Auto.

Are Comand replacements, software upgrades or other improvements necessary before installing the module?

No, you just need to use the module by following the simple instructions.

Can I order multiple activations for one module?

Yes, specify the manager how many activations are needed.

still having questions?

INSTRUCTION:

TO READ

Please read all directions before beginning.

Prepare the Car: The car must be put into programming mode first. Make sure the car is warm and everything is stable. Turn off accessories and unplug any SD or USB devices. Don’t change any settings or press any buttons while programming.
The car must be in IGNITION position 2 (all cluster leds are ON but the motor is OFF)
Go to Youtube and watch this video first – this is the video showing “IGNITION POSITION 2”.
Be Patient in this process, wait a minimum of 60 seconds until the audio head has totally booted up. THIS WILL TAKE AT LEAST A FULL MINUTE.

You are ready.
Now, plug the module to the OBD2 diagnostic socket under the dash. The COMAND screen will blank and you will see some small white lettering….
There are two programs.
“Factory settings” – if you were to run it – it will revert to the factory settings.
Turning the controller will bring you to….
“CarPlay Android Activation” – this one will activate CarPlay Android systems at your car.

Begin Installation: Using the controller, rotate or use << >> buttons to select the second script:
“CarPlay Android Activation” and confirm pressing the controller down or * star button.
This will begin the program…watch the progress bar until you see: “remove the module now” This takes about 30 seconds or so. Be Patient, don’t remove module until you see that message on screen. When you do, and only when you do, remove the module.
Never remove the Module unless the Comand screen tells you to.

You may get an error message in the service screen, for example “Mercedes Connect inoperable” or “Lights are Defective, consult workshop”. You may note the clock has reset to 12:00.
Don’t panic !
Turn the car off, wait a minute, turn it back on, the messages will clear.