ECU Tune Stage 1 G63 AMG w463

MWM hand-held module for Mercedes G63 AMG w463
схема
схема

about the function

схема (1)

Today’s engines are controlled electronically using software. MWM plug-and-play devices accesses this software via specially modules that have been developed and  tested to bring maximum performance when you want it and  retain the comfort of a daily driver when you don’t need it.

G63  w463a stage1:670 Hp/ 1020 Tq

Hand-held tuning module stores both the Stage1 file and your vehicles STOCK firmware file. The module plugs directly into the OBD2 port and delivers the file to the ECU. No special knowledge or tools are required for this process. Programming takes a few minutes and the vehicle can be re-flashed any time .
Our modifications do not disable any of the existing protection systems of engine control unit and interfere with any factory-installed safety features. So , we can confidently state that our tuning is safe and will bring years of trouble free service.

Fuel Type: Optimized for 91/93 Octane / 95/98 Ron fuel.

Video description

схема (1)

payment

схема (1)
Loading file
  • Fullscreen
  • Wireframe
  • Zoom In
  • Zoom Out
  • Rotation
  • Screenshot
  • Help

Controls

×
  • Rotate with the left mouse button.
  • Zoom with the scroll button.
  • Adjust camera position with the right mouse button.
  • Double-click to enter the fullscreen mode.
  • On mobile devices swipe to rotate.
  • On mobile devices pinch two fingers together or apart to adjust zoom.
  • On mobile devices 3 finger horizontal swipe performs panning.

ECU Tune Stage 1 G63 AMG w463

1,350.00 $

 Other Mods for your Mercedes below could be recorded on a tune module.

If you order 5+ Mods, there is a 10% discount.

reviews

схема (1)

frequent questions and answers:

MWMods warrants to the consumer that all of our hardware will be free from defects in material and workmanship for a period of a year from date of the original purchase. Before sending a hand-held tuner , we check VIN of a vehicle in order to exclude the possibility of a mistake. If the module works first time , it will work all the time. However, if suddenly stops working, we ask for a video and a photo to make sure that there are no external damage.
No , MWMods hand-held tuner won’t add neither pops nor crackles because it doesn’t disable any engine protection systems. 

There is no need to keep the module plugged in all the time. You can remove the module after ECU upgrade.

still having questions?

схема (2)

INSTRUCTION:

схема (1)

NSTALLATION MANUAL for Hand-held tuner for Mercedes with Command unit

Please read all directions before beginning .

Prepare the Car : The car must be put into programming mode first.  Make sure the car is warm and everything is stable. Make sure that car battery is fully charged. Turn off accessories and unplug any SD or USB devices.  Don’t change any settings or press any buttons while programming.

The car must be in IGNITION position 2 (all cluster leds are ON but the motor is OFF) 

Go to Youtube and watch this video first – this is the video showing “IGNITION POSITION 2”: 

https://youtu.be/qPp1ypZ90Nk

Begin Installation:  

– switch IGNITION ON (2 click clockwise) or 2 presses of Start/Stop button and make sure you see all cluster LEDS are ON

– wait till your audio head unit totally booted (about 30 seconds)

– plug module to the OBD2 (diagnostic socket) and observe audio screen messages

– select appropriate operation using << and >> audio buttons (or rotate controller knob) (choose Stage1 or Factory) 

– confirm with * (star button) or controller knob down

– observe audio screen for messages, you will see the progress bar like [xxxxxx…..% ……….. ] – wait till progress bar goes to 100%

– as soon as you see “swicth IGNITION OFF” – then switch it off and wait for next message

– as soon as you see “swicth IGNITION ON” –  switch ignition ON again

– as soon as you see “remove the module now” – the installation is  finished then  unplug the  module.

CONTACTS:

схема (1)

Apply for order

Leave a question