Exhaust Flap Selection Module

MWM hand-held module for Mercedes x253 GLC63 GLC63s AMG

about the function

Mercedes-AMG’s equipped with factory exhaust, gain the ability to OPEN and CLOSE your Exhaust Flaps using our MWM module.
The OEM Factory Valve settings DO NOT allow the flaps to fully OPEN if Sport+ and Race modes are not Enabled.
Our MWM module gives you the opportunity to open the flaps in all Dynamic Select modes, such as Comfort or Individual, and get the exhaust system sound like in Sport+ or Race modes.
In addition, the module allows you to select any of other Dynamic Select modes by default after the Next Engine Start.
If you select the other Dynamic Select modes by default, the Exhaust Flaps will be OPEN and you will get a louder more aggressive sound to your exhaust.
If you return Comfort mode to the default, the Exhaust Flaps settings will be returned to the Factory settings.

Video description

payment

Exhaust Flap Selection Module

350.00 $

The other Mods for your Mercedes below can be recorded on single module.
The module is available free of charge for orders of 5 Mods or more.

ECU hand-held Tuner Stage1

950 $

ADD TO ORDER

MultiBeam LED

400 $

ADD TO ORDER

Suspension Lowering Module

600 $

ADD TO ORDER

ECO start-stop last mode

200 $

ADD TO ORDER

Dynamic Select last set mode

150 $

ADD TO ORDER

Speed Limit Max (250|300kmh)

100 $

ADD TO ORDER

ParkSound (less sound)

100 $

ADD TO ORDER

"Don't forget Key" message off

80 $

ADD TO ORDER

Seat Belts Warning off

80 $

ADD TO ORDER

TOTAL COST:

1200$

reviews

frequent questions and answers:

Does the module have to be plugged into the OBD all the time?

No, plug in the module to activate or deactivate Exhaust Flap Selection mod.

Why do you need to disable an activated Mod?

Use the module the same way again to disable the changes. You need to do this before you visit the dealer so he won't know about the changes.

Can I order multiple activations for one module?

Yes, specify the manager how many activations are needed.

still having questions?

INSTRUCTION:

To READ

Please read all directions before beginning.

Prepare the Car: The car must be put into programming mode first. Make sure the car is warm and everything is stable. Turn off accessories and unplug any SD or USB devices. Don’t change any settings or press any buttons while programming.
The car must be in IGNITION position 2 (all cluster leds are ON but the motor is OFF)
Go to Youtube and watch this video first – this is the video showing “IGNITION POSITION 2”.
Be Patient in this process, wait a minimum of 60 seconds until the audio head has totally booted up. THIS WILL TAKE AT LEAST A FULL MINUTE.

You are ready.
Now, plug the module to the OBD2 diagnostic socket under the dash. The COMAND screen will blank and you will see some small white lettering….
There are two programs.
“Factory settings” – if you were to run it – it will revert to the factory settings.
Turning the controller will bring you to….
“Exhaust Flap ON” – this one will activate ECO start-stop memory at your car.

Begin Installation: Using the controller, rotate or use << >> buttons to select the second script:
“Exhaust Flap always ON” and confirm pressing the controller down or * star button.
This will begin the program…watch the progress bar until you see: “remove the module now” This takes about 30 seconds or so. Be Patient, don’t remove module until you see that message on screen. When you do, and only when you do, remove the module.
Never remove the Module unless the Comand screen tells you to.

You may get an error message in the service screen, for example “Mercedes Connect inoperable” or “Lights are Defective, consult workshop”. You may note the clock has reset to 12:00.
Don’t panic !
Turn the car off, wait a minute, turn it back on, the messages will clear.