Instagram Facebook Whatsapp Youtube

x167 ECU Tune Stage 1 for GLS580 2020-2023

MWM hand-held module for Mercedes x167 GLS580
схема
схема

about the function

схема (1)

Today’s engines are controlled electronically using software. MWM plug-and-play devices accesses this software via specially modules that have been developed and  tested to bring maximum performance when you want it and  retain the comfort of a daily driver when you don’t need it.

MWM tuning module stores both the Stage1 file and your vehicles STOCK firmware file. The module plugs directly into the OBD2 port and delivers the file to the ECU. No special knowledge or tools are required for this process. Programming takes a few minutes and the vehicle can be re-flashed any time . MWM tune modifying ignition timing and throttle mapping, optimizing air-to-fuel ratios, increasing the engine’s rev limiter and modifying boost mapping for turbo-charged vehicles.

Our modifications do not disable any of the existing protection systems of engine control unit and interfere with any factory-installed safety features. So , we can confidently state that our tuning is safe and will bring years of trouble free service.

ECU upgrade for the Mercedes M176 engine offers huge gains in performance across the entire RPM range without sacrificing around town comfort or daily driver reliability.

x167 GLS580 4.0L V8 BiTurbo  Modified Performance:
570(+81) whp / 610(+94) ft-lb tq (measured on all wheel Dynojet)

Stage1 Most Wanted Mods:
– Software changes only , no physical interventions.
– The priority is the resource.
– Maintenance of the stock version = maintenance of the tuned version .

Video description

схема (1)

payment

схема (1)
Loading file
  • Fullscreen
  • Wireframe
  • Zoom In
  • Zoom Out
  • Rotation
  • Screenshot
  • Help

Controls

×
  • Rotate with the left mouse button.
  • Zoom with the scroll button.
  • Adjust camera position with the right mouse button.
  • Double-click to enter the fullscreen mode.
  • On mobile devices swipe to rotate.
  • On mobile devices pinch two fingers together or apart to adjust zoom.
  • On mobile devices 3 finger horizontal swipe performs panning.

x167 ECU Tune Stage 1 for GLS580 2020-2023

The ECU Tune Stage 1 is configured for the Mercedes-Benz GLS580 with the x167 chassis, produced from 2020 to 2023. It installs an MWMods Stage 1 calibration and retains the option to restore the vehicle’s stock firmware. The hand-held module is prepared for the specified vehicle and can be used through the diagnostic port without a laptop or special tools. Please submit your VIN before ordering so compatibility with your exact vehicle specification can be confirmed.

5/5 ★★★★★ 1 reviews

FROM:

1,050.00 $

Send an Order Request
Buy Now

Order Processing

схема (1)
Orders are processed within 1–3 business days after payment confirmation. Tracking details are sent by email or SMS after dispatch. We ship worldwide via FedEx, DHL Express, DPD, and InPost for selected destinations. Delivery to PO Boxes is not available.

Estimated Delivery Times

Destination Estimated Delivery Time
European Union 1–7 days
United Kingdom 2–8 days
North America 3–10 days
Australia 3–12 days
Switzerland, Norway, Sweden, and Finland 1–11 days, depending on the selected courier
Asia, South Korea, and the United Arab Emirates 3–21 days
Other International Destinations 3–21 days
International orders may be subject to customs duties, import taxes, or local carrier fees. These charges are the responsibility of the recipient.

Returns

Only defective products may be returned within 14 days from the delivery date. Approved returns are free of charge and qualify for a full refund after the returned product has been received and inspected. Non-defective products cannot be returned. For shipping or return assistance, contact info@mwmods.com.

frequent questions and answers:

MWMods warrants to the consumer that all of our hardware will be free from defects in material and workmanship for a period of a year from date of the original purchase. Before sending a hand-held tuner , we check VIN of a vehicle in order to exclude the possibility of a mistake. If the module works first time , it will work all the time. However, if suddenly stops working, we ask for a video and a photo to make sure that there are no external damage.
No , MWMods hand-held tuner won’t add neither pops nor crackles because it doesn’t disable any engine protection systems. 

There is no need to keep the module plugged in all the time. You can remove the module after ECU upgrade.

still having questions?

ASK US A QUESTION
схема (2)

INSTRUCTION:

схема (1)

Please read all directions before beginning.

Prepare the Car: 

The car must be put into programming mode first

Make sure the car is warm and everything is stable

Make sure the car battery is fully charged

Turn off accessories and unplug any SD or USB devices

Don’t change any settings or press any buttons while programming

The car must be in IGNITION position 2 (all cluster leds are ON but the motor is OFF)

Be Patient in this process, wait a minimum of 60 seconds until the audio head has totally booted up. 

Begin Installation:  

– switch IGNITION ON (2 click clockwise) or 2 presses of Start/Stop button and make sure you see all cluster LEDS are ON

– wait till your audio head unit totally booted (60 seconds)

– plug module to the OBD2 (diagnostic socket) under the dash and observe the blinking green light on one side of the module
– wait 1-3 minutes before the light stop totally blinking
– installation is finished, unplug the module, ignition off.

You may get an error message in the service screen, for example “Mercedes Connect inoperable” or “Lights are Defective, consult workshop”.  You may note the clock has reset to 12:00. Turn the car off, wait a minute, turn it back on, the messages will clear.

Important: Do not leave the module on the OBD connector. Use the module only when you want to switch between Stage1(2) and factory maps.

In addition to the module you will find an SD card on which the factory map is recorded. The SD card from Stage1(2) is already installed in the module. In order to install the Stock map, replace the SD cards and repeat the installation process. Below are instructions on how to disassemble the module:

– open the box with the knife. Do not put the knife more than 2-3mm. Open OBD tune box from the long side not to damage electronics) 

– remove the microSD card (just pull it out)

– plug the second microSD card to the socket

– then repeat all actions you did the first time when downloading the Stage1(2) file. 

 

reviews

схема (1)
(1 customer review)

Description

The ECU Tune Stage 1 is configured for the Mercedes-Benz GLS580 with the x167 chassis, produced from 2020 to 2023. It installs an MWMods Stage 1 calibration and retains the option to restore the vehicle’s stock firmware. The hand-held module is prepared for the specified vehicle and can be used through the diagnostic port without a laptop or special tools. Please submit your VIN before ordering so compatibility with your exact vehicle specification can be confirmed.

Additional information

production-year

2020, 2021, 2022, 2023
auto-model

GLS580
chassis-number

x167

1 review for x167 ECU Tune Stage 1 for GLS580 2020-2023

  1. Joshua Adams –

    Very satisfied with the purchase. The support team was responsive and made everything simple.

Add a review

Your email address will not be published. Required fields are marked *

Check these modules for GLS580

CONTACTS:

схема (1)

Instagram

Facebook

Youtube

TikTok

WhatsApp

Email

TEXT US
buy now

Apply for order

Pay with debit or credit card via PayPal
Fill the form below, click “Pay Now,” and proceed payment. Thats all!

TOTAL COST:

1,050.00 $

Leave a question